4
16.
FOLLOW THESE STEPS WHEN BATTERY IS OUTSIDE VEHICLE. A SPARK NEAR THE BATTER
Y MAY CA
USE
BATTERY EXPLOSION. TO REDUCE RISK OF A SPARK NEAR BATTERY
:
a.
Check polarity of ba
�
ery posts. POSITIVE (POS, P, +) ba
�
ery post usually has a larger diameter than
NEGATIVE (NEG, N, –) post.
b.
A
�
ach at least a 24-inch-long 6-gauge (AWG) insulated ba
�
ery cable to NEGATIVE (NEG, N, –) ba
�
ery
post.
c.
Connect POSITIVE (RED) charger clip to POSITIVE (POS, P, +) post of ba
�
ery.
d.
Posi�on yo
urself and free end of cable as far away from ba
�
ery as possible – then connect NEGATIVE
(BLACK) charger clip to free end of cable.
e.
Do not face ba
�
ery when making
fi
nal connec
�on.
f.
When disconnec
�ng
charger, always do so in reverse sequence of connec
�
ng procedure and break
fi
rst
connec
�on
while as far away from ba
�
ery as prac
�c
al.
g.
A marine (boat) ba
�
ery must be removed and charged onshore. To charge it on board requires
equipment specially designed for marine use.
WARNIN
G:
This product can expose you to chemicals including LEAD, which is known to the State of California to
cause cancer and birth defects or other reproduc
�v
e harm. For more informa
�on
go to
www.P65Warnings.ca.gov
.
W
hen using this
a
ppli
anc
e alw
a
ys exerci
s
e
ba
sic safety prec
au
�ons including the
f
ollowing:
This charger is not intended for use by children.
The supply cord cannot be replaced. If the cord is damaged the appliance should be scrapped.
Examine the ba
�
ery charger regularly for damage, especially the cord, plug and enclosure, if the ba
�
ery
charger is damaged, it must not be used un
�
l it has been repaired.
FCC Wa
rning
Title 47 Subpart, 15.105(b)
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protec
�on
against harmful interference in
residen
�
al inst
alla�on
. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruc
�ons
, may cause harmful interference to radio television recep
�on
, which can be
determined by tuning the equipment o
ff
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separa
�
on between the equipment and receiver.
Connect the equipment into an outlet on a circuit di
ff
erent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
ICES-00
1:
I
ndustr
ia
l
,
Scie
n
�fic
, an
d Med
ica
l
(I
SM
)
Radio
F
re
qu
e
nc
y Ge
n
er
at
ors
This product has been tested with the listed standards and found to be compliant with the Code of Industry Canada ES-
001 and the measurement Procedure according to CISPR 11.
CAN ICES-001 (B)/N
MB
-001 (B)
