© Copyright Charge Amps AB
Doc. Nr: 130741-EN
Rev 01
Charge Amps
Frösundaleden 2B
SE-169 75 Solna
Sweden
www.chargeamps.com
Org. No. 556897-7192
Registered office: Solna
14
6.
Configuration
6.1.
Connect to WiFi
6.1.1.
Access Charge Amps Halo WiFi access point
N.B. Not needed if LAN is used (
some models only
). See chapter
6.2 Connect via LAN.
Charge Amps Halo WiFi access point is not connected to a network.
Charge Amps Halo WiFi access point is only accessible within 10 minutes after power on.
1.
Connect to Charge Amps Halo WiFi using a smartphone, tablet or a computer.
To avoid conflicting WiFi, set to airplane mode.
•
SSID: HALO_nnnnnnM (nnnnnn equals the last 6 digits of the serial
number).
•
Password: Enter the Charge Amps Halo pin-code.
2.
Start a web browser and type in 192.168.250.1 as search path.
3.
Proceed to the chapter according to the table below.
Charge Amps Halo
See chapter
6.1.2 Connect to WiFi
Charge Amps Halo OCPP version
See chapter
6.1.3 Connect to WiFi
