© Copyright Charge Amps AB
Doc. Nr: 130741-EN
Rev 01
Charge Amps
Frösundaleden 2B
SE-169 75 Solna
Sweden
www.chargeamps.com
Org. No. 556897-7192
Registered office: Solna
8
E.
EV connector holder
F.
Front cover
G.
Back cover
H.
Cable entry: LAN connection (
some models only
)
I.
Cable entry: incoming electrical connection
J.
WiFi-antenna entry (
some models only
)
K.
Cable entry: fixed charging cable
3.2.
Package contents
•
Charge Amps Halo
•
WiFi antenna (
some models only
)
•
Five-pin terminal connector for feed current
•
EV connector holder
•
RFID card
•
Document with serial number and password
•
Quick Guide User
4.
Before Installation
4.1.
Recommended tools
•
Screwdriver; flat-bladed screwdriver for electrical installations 3.5 mm
•
Drill for screw/plug for wall mount
•
Laser/spirit level for proper mounting on the wall
•
Wire stripper for cabling
•
Angled Allen key H4
4.2.
Materials provided by installer
•
3 x 5 mm flat head stainless screws type A2 or A4 with associated plugs (
if
required
) for mounting of Charge Amps Halo
•
4 x 3.5 mm screws with recessed head for wall mounting of the EV connector
holder
•
External sealant for the wall (
if required
)
•
External type A RCD, 30 mA
•
Installation cable max 14.0 mm outer diameter, according to the charging
capability of the selected product
•
LAN cable with short connector head (
some models only
)
