background image

IMPORTANT SAFEGUARDS

SAVE THESE INSTRUCTIONS

Read and understand all instructions before using the appliance.

•  NEVER put the unit near a hot burner or in an oven.
•  DO NOT use for any purpose other than intended use.
•  ALWAYS place the unit on a firm and stable surface.
•  Ensure that the unit is not placed close to the edge of the table, worktop, etc. where it can be 

pushed off or fall.

•  NEVER use abrasive cleaning agents or abrasive cloths when cleaning the unit.
•  ONLY use the unit when completely assembled.
•  Before using for the first time, remove all packaging and thoroughly wash all parts with hot soapy 

water.

•  You can be killed or seriously injured if you don’t immediate follow instructions.
•  All safety messages will tell you what the potential hazard is, tell you how to reduce the chance
    of injury, and tell you what can happen if the instructions are not followed.

•  When using electrical appliances, basic safety precautions should be followed to reduce the risk of 

fire, electric shock, and injury to persons or property. Read all instructions before using any appliance.

•  DO NOT operate this or any other appliance with a damaged cord.
•  Connect to properly polarized outlets only. No other appliance should be plugged into the same 

outlet. Be sure that the plug is fully inserted into the receptacle.

•  DO NOT run the power cord over carpeting or other heat insulators. Do not cover the cord.
•  Keep cord away from traffic areas, and do not submerge in water.
•  We DO NOT recommend the use of an extension cord, as it may overheat and become a risk
    of fire. If you must use an extension cord, use No.14 AWG minimum size and rated no less
    than 1875 watts.
•  Unplug the ice maker before cleaning or making any repairs or servicing.
•  Exercise CAUTION and use reasonable supervision when appliance is used near children.
•  DO NOT use your ice-maker outdoors. Place the ice-maker away from direct sunlight and make 

sure that there is at least 4 inches of space between the back of your unit and wall.

•  Keep a minimum distance of 4 inches on each side of your unit free.
•  DO NOT use other liquid to make the ice-cube other than water.
•  DO NOT clean your ice maker with flammable fluids. The fumes can create a fire hazard or
    explosion.
•  DO NOT tip over.
•  If the ice maker is brought in from outside in wintertime, give it a few hours to warm up to room 

temperature before plugging it in.

•  WARNING: This appliance must be grounded.
•  To avoid a hazard due to instability of the appliance, it must be placed on an even or flat surface.

PREPARING FOR USE

1

Содержание IM-12SS









Отзывы: