HOW TO SET THE TIMER
CLEANING REMINDER
HOW TO SET THE CLOCK & DISPLAY PANEL
1. Press the TIMER button first - the default “3.0H” delay time will flash in LCD display window.
2. Then press the SELECT button to select your desired delay time. Each press of the SELECT button
will increase the flashing delay time by 0.5 hour. If you HOLD the SELECT button for more than 3
seconds, the delay time will increase very quickly.
3. After 5 seconds, the delay time digit will change from flashing to always displaying. This means the
timer program has been set.
HOW TO CANCEL THE TIMER
When the unit has been set with the timer or during the timer setting process, press the
TIMER button, then the delay time digit will disappear. This means the timer set has been cancelled.
This unit is supplied with CLOCK dipalying function. If the displayed time is not
correct, you can adjust it to the correct digit through the CLOCK and SELECT
button.
First press the CLOCK button once, the digit meaning hour will
start to flash first. Then you can press SELECT button to change it. Each press
will increase by 1 hour.
Press the CLOCK button again. The digit meaning minute will start to flash.
Press the SELECT to change it.
Then press the CLOCK the third time to confirm it. Now it displays the new
correct time.
During adjusting process, after 5 seconds flashing, the digit will automatically
change to always display. This means the new time has been set.
When the symbol flashes, the unit needs to be cleaned. After you have cleaned the unit, press the
TIMER button for more than 5 seconds. This symbol will disappear from the LCD display window. The
cleaning timer will reset to Zero and reaccount again.
5
