Char-Griller Flat Iron 8036, Руководство пользователя

Страница: 21 / 116

C-1
OPERATING INSTRUCTIONS
Setting Up
This appliance is designed for use outdoors, away from any flammable materials. It is important
that there are no overhead obstructions and that there is a minimum distance of 36 inches (90 cm)
from the side or rear of the appliance. Maintain 10 ft. clearance to objects that can catch fire or sources
of ignition such as pilot lights on water heaters, live electrical appliances, etc. It is important that the
ventilation openings of the appliance are not obstructed.
The grill must be used on a level, stable surface. The appliance should be protected from direct drafts
and positioned or protected against direct penetration by any trickling water (e.g. rain). Do not move grill
while hot, and do not leave unattended during operation.
Protect LP cylinder from direct sunlight and keep away from heat sources max. 122°F (50° C). Do not
move grill while hot, and do not leave unattended during operation. Position gas cylinder such that hose
is not bent, twisted, subject to tension, or touching any hot parts of appliance.
NEVER EXCEED 650°F BECAUSE THIS WILL DAMAGE THE FINISH AND
CONTRIBUTE TO RUST. PAINT IS NOT WARRANTED AND WILL REQUIRE TOUCH-UP.
THIS UNIT IS NOT WARRANTED AGAINST RUST.
CAUTION:
1. All cleaning and maintenance should be done when the griddle is cool and the fuel supply
is DISCONNECTED.
2. Do NOT clean any griddle part in a self-cleaning oven as the extreme heat will damage
the finish.
3. Do NOT enlarge valve orifices or burner ports when cleaning the valve or the burners.
NOTICES:
1. This griddle should be thoroughly cleaned, inspected and seasoned on a regular basis.
2. Abrasive cleaners will damage this product.
3. NEVER use oven cleaner on any part of this griddle.
BEFORE EACH USE:
1. Ensure griddle area is clean and free of any combustible materials like gasoline, lighter fluid or any
other flammable vapors or liquids.
2. Do NOT obstruct the flow of the combustion of LP gas and the ventilation of air.
3. Keep the ventilation opening(s) of the LP gas tank area free and clear of debris.
4. Visually check the burner flames to make sure griddle is working properly.
5. See sections below for proper cleaning and maintenance instructions.
Check for obstructions of airflow to the burners. Spiders, insects, and webs can clog the burner tubes. A
clogged burner can lead to a fire.