ASSEMBLY
1
Left leg
Place upper leg as shown. NOTE: Left front and left back legs do not have leg extenders. In front, attach upper leg, side
brace and left front leg (curve) with #10-24x1-1/4’’ machine screw and #10-24 flange nut. In back, attach upper leg, side
brace and left rear leg (straight).
Attach support bracket in third hole from bottom of leg with two hinge pins and hitch pins .
Right leg
Place upper leg as shown. Attach upper leg and right front leg (curve) with #10-24x1-1/4’’ machine screw and #10-24
flange nut. Then attach upper leg and right rear leg (straight).
Attach support bracket with #10-24x1-1/4’’ machine screws and #10-24 flange nuts .
2
Hitch Pin
Qty.2
Hinge Pin
Qty.2
#10-24x1-1/4’’
Machine Screw
Qty.1
#10-24
Flange Nut
Qty. 1
#10-24x1-1/4’’
Machine Screw
Qty.3
#10-24
Flange Nut
Qty. 3
Left Front Leg
(Curve)
Support Brac
ket
Left Back Leg
(Straight)
Side Brace
Upper Leg
Right Front Leg
(Curve)
Right Back Leg
(Straight)
Support B
racket
Leg Extender
Upper Leg
Hinge Pin
Hitch Pin
17
