7
8
Control Panel and Firebox Supports
Stand cart upright.
In front, fit control panel between left and right legs, attach control panel with #10-24x2’’ machine screws. Place firebox
supports onto screws and tighten with #10-24 flange nuts. Tighten all screws.
In back, attach upper firebox support with #10-24x2’’ machine screws and #10-24 flange nuts.
Valve/ Hose/ Regulator and Ignitor
Insert main burner valve and hose between left firebox support and side brace, panel with #10-24x1/2" machine screws.
Attach ignitor to control panel using the stamped nut that's provided.
NOTE:
if your grill comes with Snap-in ignitor, please
see Option.
#10-24x2”
Machine Screw
Qty.8
#10-24
Flange Nut
Qty.8
Right firebox
support
Left firebox
support
Control panel
Chamfer edge
Back of
cart
#10-24x1/2”
Machine Screw
Qty. 2
Option:
Snap the
ignitor into the
control panel.
Snap-in Ignitor
Back of cart
Ignitor
Main burner valve
Hose
Stamped nut
Left firebox support
Side brace
20
