Char-Broil 463250511, Руководство по эксплуатации продукта

Страница: 20 / 36

11
20
12
Inside of cart, insert rear tabs(w/o holes) of tank heat shield into slots on the bottom of upper back panel.
Attach front tabs(w/holes) of tank heat shield under front brace using two #8x3/8” self-tapping screws.
Connect each of the wires from the main burner electrodes, and sideburner electrode into the back of the Electronic Ignition
Module.
T
otal (4) connections.
Connect the two wires[(a) and (b)] from the switch wiring harness into the back of the Electronic Ignition Module.
NOTE: Switch terminals are larger than electrode terminals and should only be installed in location shown as (a),(b).
Total (2) connections, shown A .
ignition module
Electronic
Left side panel
A
B
C
Release the cap and nut from electronic ignition module. Attach electronic ignition module to the cart left side panel with
the nut, shown B .
Insert AA battery into ignition module, negative (
-
) end first. Then put on the cap, shown C .
Nut
-
+
AA battery Cap
4
(a)
(b)
Front brace
Tank heat shield
#8x3/8” self-tapping
screw
3
1
2