10 • 4632236
Connecting Your Grill to the
Natural Gas Source
1. Coat pipe nipple with gas resistant dope. Screw socket onto gas
manifold at gas source (A).
2. Connect unattached end of natural gas hose to socket. Push sleeve
back on socket (B) and insert plug until sleeve snaps forward, locking
plug into socket.
When socket and plug are connected, valve in socket opens automati-
cally to permit full gas flow. When coupling is disconnected, valve in
socket instantly and positively shuts off flow of gas. Because valve in
socket positively shuts off flow of gas, grill can be disconnected from gas
source by disconnecting hose from socket. Socket can be left on
manifold of gas source if so desired.
With proper assembly, plug cannot be removed without
pushing sleeve back. To disconnect, push sleeve back and pull plug
out of sleeve (this automatically shuts off gas).
Please Note: Hose and assembly are A.G.A. certified and C.G.A.
listed for natural gas, manufactured gas, mixed gas and for
liquefied petroleum and for LP Gas-Air mixtures on basis of 0.64
specific gravity for 1000 BTU's per cubic foot of gas at 0.3 in.
water column pressure drop. Only ANSI Z21.54 approved hoses
should be used with this grill.
The appliance and its individual shut off valve must be discon-
nected from the gas supply piping system during any pressure
testing of that system at test pressures in excess of
1/2 psig (3.5kPa).
The appliance must be isolated from the gas supply piping
system by closing its individual manual shutoff valve during
any pressure testing of the gas supply piping system at test
pressures equal to or less than 1/2 psi (3.5 kPa).
Use and Care
Gas
Flow
Pipe Nipple
Gas Manifold
Socket
Sleeve
Insert cover in socket
when hose is removed
Plug
Hose
Socket
Push sleeve back to attach
Hose
Plug
B
B
B
B
B
A
A
A
A
A
WARNING
WARNING
WARNING
WARNING
WARNING
• Do not use hard metal piping of any kind to
connect this type of grill to natural gas source. Use
ONLY hose specified by Char-Broil. Using hard
metal piping or convoluted metal tubing is an
unsafe practice. Movement of the grill can cause
breakage of metal pipe.
WARNING
WARNING
WARNING
WARNING
WARNING
• Connection to gas source must be done by a
certified plumber.
IMPORTANT:
IMPORTANT:
IMPORTANT:
IMPORTANT:
IMPORTANT:
Regulator supplied with grill MUST be
utilized for natural gas connection.