Connection and Setup
Cable Connections
Before the installatio
n and use, please read carefully the relevant content in “Warning
and Safety instructions”.
NOTE:
When you plug or unplug the TV, computer or other equipments, you must make
sure that the AC power has been already shut down;
When unplugging the power cable or signal cable, please hold the plug (the
insulated part); do not draw the body of the cable.
•
LAN:
Use a network cable to connect the interface and the broadband network
interface.
•
HDMI1/2/3:
(High-Definition Multimedia Interface) it provides an uncompressed digital
connection that carries both video and audio data by way of an integrated mini-plug
cable.
•
PC:
Connect one end of the VGA cable with the VGA port on computer, connect the
other end of the VGA cable with the VGA port on the TV, and tighten the bolts
clockwise on the each end of VGA cable.
NOTE:
While connecting the 15-pin VGA, please do not insert the plug overexertedly, for
fear the pin might be broken.
•
ANT:
Connect the antenna to TV via coaxial cable on ANT jack of the back panel.
•
DIGITAL AUDIO OUT:
Sending the TV's digital audio signal to external audio
equipment via the Digital Audio Output port.
•
HEAD PHONE (
):
Connect a 3.5mm headphone for personal audio.
•
USB2.0:
Connect a USB Storage device and multimedia file playback.
•
COMPONENT
input (YPbPr):
Connect a device that has component video jacks,
such as a DVD player.
Y/Pb/Pr (Component Video): They provide good picture quality because the video
signal is separated into three components. Use three video-grade or component video
cables for the connection. When using Y/Pb/Pr, make sure you connect left and right
audio cables to the AV/YPbPr _R/L jacks.
NOTE:
Component and AV inputs cannot be used at the same time since they share one
single audio input.
If COMPONENT (Y,Pb,Pr) and AV works as mini terminal, and shared same audio,
please choose to use a one-to-three audio & video cable.
•
AV IN:
The output AV terminal of DVD can be connected with the AV input port of the
TV through AV cable.
•
AV OUT:
The monitoring signal output of the TV set can be used as the signal source.
NOTE
：
Connect the AC power cable with 100-240V AC power supply.
The range of power input for the TV is 100-240V~, 50/60Hz, do not connect the TV
power input port with the AC power out of the above range.
Before connecting to an external device, please firstly make sure that the TV set and
the external device have been turned off. When connecting, please make reference
to the interface name and the interface color to connect the signal cable.
The unit has a built-in wireless network card, and can directly receive network signals
from wireless router through WIFI antenna.
7
Содержание UHD55F6000
Страница 1: ...Model UHD55F6000 www changhong com...
