manualshive.com logo in svg

Champion D-H1M3, Техническое руководство, Страница: 8 / 69

Поделиться
Скачать
Champion D-H1M3 Скачать руководство пользователя страница 8

INTRODUCTION

Welcome to 

Champion . . .

and thank you for allowing us to take care of your dishwashing needs.

This manual covers the door-type series dishwasher models D-H1, D-HB, and D-LF. 
Your machine was completely assembled, inspected, and thoroughly tested at our factory before
it was shipped to your installation site.

This manual contains:

• Warranty Information 

• Operation and Cleaning Instructions 

• Maintenance Instructions

• Troubleshooting Guide

• Basic Service Information

• Replacement Parts Lists

• Electrical Schematics

Complete and return your warranty registration card within ten (10) days after the installation of
your machine.

All information, illustrations and specifications contained in this manual are based upon the
latest product information available at the time of publication. 

Champion 

constantly improves

its products and reserves the right to make changes at any time or to change specifications or
design without notice and without incurring obligation.

For your protection, factory authorized parts should always be used for repairs.

Replacement parts may be ordered from your 

Champion

authorized parts distributor or 

from your 

Champion 

authorized service agency. When ordering parts, please supply the model

number, serial number, voltage and phase of your machine, the part number, part description and
quantity.

6

INTRODUCTION

Содержание D-H1M3






































































Отзывы:

Нет отзывов