manualshive.com logo in svg

Champion D-H1M3, Техническое руководство, Страница: 24 / 69

Поделиться
Скачать
Champion D-H1M3 Скачать руководство пользователя страница 24

22

BASIC SERVICE

BASIC SERVICE

This Basic Service section does not cover all possible repair procedures. If you require additional
service support, you may call your local service company or:

Champion National Service

In Canada

1-800-858-4477

1-800-263-5798

Please have the Model and Serial Number of the machine ready when you call.

ELECTRICAL SERVICE

WARNING:

Disconnect Power at main disconnect switch before removing lower panels. Removing
lower panels exposes live open electrical wiring (not contained in conduit).  

Always replace panels after completing service or repairs.  Do not operate the 
dishwasher with panels removed for anything other than service repair operation.                 

NOTE:

DO NOT USE CHASSIS GROUND WHEN PERFORMING VOLTAGE CHECKS.

Doing so will result in false and inaccurate readings.

PERFORM VOLTAGE CHECKS BY READING FROM THE HOT SIDE OF THE 
LINE AND NEUTRAL (any #2 or white wire).

WARNING:

USE EXTREME CAUTION

when performing tests on energized circuits.

WARNING:

When repairing a circuit, disconnect the power at the main service disconnect switch and 
place a tag at the disconnect switch to indicate that work is being performed on the circuit.

Troubleshooting

Schematics

Champion places an electrical schematic in the control cabinet of every machine before it is
shipped. Schematics are included at the back of this manual as well. Be aware that these
schematics include options that may not apply to your machine. Options are enclosed in dashed
lines with the words (IF USED) next to them on the schematic. Disregard any options that
appear on the schematics which are not a part of your machine.

!

!

!

Содержание D-H1M3






































































Отзывы:

Нет отзывов