Champion D-H1M3 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 69

Champion D-H1M3 Скачать руководство пользователя страница 20

MAINTENANCE

Cleaning your machine is the best maintenance that you can provide. Components that are not
regularly flushed and cleaned do not perform well.

The Maintenance intervals shown in the following schedules are the minimum requirements
necessary for the proper performance of your machine. Maintenance intervals should be
shortened whenever your machine is faced with abnormal working conditions, hard water, or
multiple shift operations.

Maintenance Schedule

CLEANING

• Every 2 Hours or After Each Meal Period

Model D-HB, D-H1, and D-LF

1. Flip the power switch OFF.
2. Lift drain lever, drain the machine.
3. Flush tank interior with fresh water.
4. Remove and clean the scrap screens. Clean the pump intake screen.
5. Inspect the spray arm nozzles and rinse nozzles. Clean if necessary.
6. Close door, flip power switch ON to refill machine.

• Every 8 Hours or at the End of the Day

Model D-HB, D-H1, and D-LF

1. Flip the power switch OFF.
2. Lift drain lever, drain the machine.
3. Flush tank interior with fresh water.
4. Remove and clean the scrap screens. Clean the pump intake screen.
5. Remove the spray arms.
6. Clean and inspect the spray arm bearings.
7. Flush the wash arm and rinse arm assemblies and nozzles.
8. Back flush the scrap screens and pump intake strainer.
9. Thoroughly clean the exterior of the machine. DO NOT HOSE DOWN WITH WATER.

10. Reassemble the machine. Leave the door open to aid overnight drying.

CAUTION:

DO NOT LEAVE WATER IN WASH TANK OVERNIGHT

18

MAINTENANCE

!

«
...
18
19
20
21
22
...
»

Содержание D-H1M3






































































Отзывы:

Нет отзывов