EN
3
Use
The assembly and the disassembly of the mixing head (Picture A)
1. Attach the bowl cover to insert the notch and the upper end of the dough hook to the driving
shaft.
2. Push to dough hook upward and turn counterclockwise until it cannot move.
Disassembly (Picture B)
1. Push the dough hook upwards and turn clockwise until it cannot move.
2. Take the hook out and remove the transparent lid.
Picture A
Picture B
Mixing Bowl
1. Put the mixing bowl on a safe and stable, clean, and dry place.
2. Hold the head of the machine with one hand and push the lift-head button with another hand.
The head of the machine could be lifted automatically, and you can lift the head of the machine
to its highest point with the help of your hand.
3. Insert the stirring rod to its required position as the instructions above.
4. Put the stainless-steel bowl in the required position and lock it clockwise.
5. Add your ingredients, do not overload the bowl.
6. When the steps above are completed, push down the head of the machine, in a locked and
horizontal position.
7. Plug the machine.
8. Turn the knob to mode 1 to start the machine, after 30 seconds, turn the knob to mode 2 to start
mixing.
9. Turn the machine off by turning to “OFF” mode. Then unplug the machine.
10. Release the stainless-steel bowl by turning it anticlockwise.
ATTENTION:
For first time use, please clean the parts with detergent, and use running water
to rinse off the detergent. Air-dry the parts for later use.
Dough hook
This object is used for the mixing and stirring of bread dough and other high-density food. Insert the
dough hook and the stainless mixing bowl into the machine according to above steps. Put flour and
dry yeast and other required liquid materials into the mixing bowl, then start the machine.