Champion BDR5K, Руководство по эксплуатации и обслуживанию, список запасных частей, Страница: 12 / 36

10
GUIDE TO MAINTENANCE
For Service contact an authorized Champion distributor. All requests should include model number
and serial number. To obtain reliable and satisfactory service, this unit requires a consistent
preventive maintenance schedule. Maintenance schedule form is included to aid in keeping the
proper records, See Pages 32 & 33
Before performing any maintenance function, be sure all air pressure in unit is relieved.
Failure to do this may result in injury or equipment damage.
Never add fuel to the fuel tank of a hot engine. Spilled fuel may ignite and cause injury or
equipment damage.
DAILY MAINTENANCE
1.
Check oil level of compressor. Add Champlub recip lubricant as required. See
“Compressor Oil
Specifications
” Section. NOTE
: Do not mix oil type, weight, or brands.
2. Check oil level of engine. Consult engine manual for manufacturer
’s recommended oil.
3. Drain moisture from tank by opening tank drain cock located in bottom of tank. Do not open drain
valve if tank pressure exceeds 25 PSIG.
WEEKLY MAINTENANCE
1. Clean dust and foreign matter from cylinder head, engine, fan blade, air lines, intercooler and tank.
2. Remove and clean intake air filters.
Do not exceed 15 PSIG nozzle pressure when cleaning element parts with compressed air. Do
not direct compressed air against human skin. Serious injury could result. Never wash
elements in fuel oil, gasoline or flammable solvent.
3. Check V-belts for tightness. The V-belts must be tight enough to transmit the necessary power to
the compressor. Adjust the V-belts as follows:
a. Remove belt guard bracket and open top half of belt guard.
b. Loosen engine mounting plate fasteners (3 Bolts & 1 Nut)
c. Use belt adjustment bolt at end of base plate to adjust belt tension.
d. Apply pressure with finger to one belt at midpoint span. Tension is correct if top of belt aligns with
bottom of adjacent belt. Make further adjustments if necessary.
e. Check the alignment of pulleys. Adjust if necessary.
f. Tighten engine mounting plate fasteners
g. Close top half of belt guard and re-install belt guard bracket.
Never operate unit without belt guard in place. Removal will expose rotating parts which can
cause injury or equipment damage.