Champion 71000i, Руководство пользователя и инструкции по эксплуатации

Страница: 12 / 27

Assembly
8 Rev 71000i-20100401 E
Assembly
This unit ships from our factory without oil.
It must be properly serviced with fuel and oil
before operation.
If you have any questions regarding the
assembly of your generator, call our help
line at 1-877-338-0999. Please have your
serial number and model number available.
Remove the Generator from
the Shipping Carton
1. Set the shipping carton on a solid, flat
surface.
2. Remove everything from the carton
except the generator.
3. Using the handle of the unit, carefully
remove the generator from the box.
Add Engine Oil
CAUTION
DO NOT attempt to crank or start the engine
before it has been properly filled with the
recommended type and amount of oil. Damage
to the generator as a result of failure to follow
these instructions will void your warranty.
1. Place the generator on a flat, level
surface.
2. Loosen the cover screw and remove the
maintenance cover.
3. Remove oil fill cap/dipstick to add oil.
4. Add 0.26 qt (0.25 L) of oil and replace
oil fill cap/dipstick. See “Specifications”
page in the manual for oil
recommendations based on operating
conditions.
5. Check engine oil level daily and add as
needed.
CAUTION
The engine is equipped with a low-oil-shutoff and
will stop when the oil level in the crankcase falls
below the threshold level.
NOTE
Check oil often. Refer to the Maintenance section
for recommended service intervals.