background image

201033 - 6000W PORTAbLE GENERATOR

OPERATION

19

Neutral Bonded to Frame*

 

Neutral circuit 

IS

 electrically connected to the frame/ground of 

the generator.

 

The generator system ground connects lower frame cross-
member below the alternator. The system ground is connected 
to the AC neutral wire.

* See your Specifications section for specified type of grounding.

OPERATION

CO Shield™ - Carbon Monoxide (CO) 
Detection and Auto-shutoff System

The CO Shield™ technology monitors the accumulation of 
poisonous CO gas produced by engine exhaust when the generator 
is running. If CO Shield detects elevated levels of CO gas, it 
automatically shuts off the engine. Generators are intended to 
be used outdoors, far away from occupied buildings and exhaust 
pointed away from people and buildings.

25 ft. / 7 m

If misused and operated in a location that results in the 
accumulation of CO inside an enclosed or partially enclosed space, 
for example a house, garage or a garage with the door partially 
open, CO Shield will automatically shut off the generator and then 
illuminate a red LED. Read the action label for what steps to take. 

CO Shield is not a substitute for an indoor carbon monoxide 
alarm.

1607-L-SF-B

25 ft. / 7 m

AUTOMATIC SHUTOFF – YOU MUST:

APAGADO AUTOMÁTICO – USTED DEBE:

ARRÊT AUTOMATIQUE – VOUS DEVEZ :

Move generator to an open, outdoor area. Point exhaust away. Don’t run generators 

in enclosed areas (e.g. not in house or garage).

Mover el generador a un área abierta a la intemperie. Apunte el escape alejado. No corra los 

generadores en áreas cerradas (ej. no en una casa o garaje).

Déplacer le générateur vers un espace extérieur 

en plein air. Garder l’échappement loin. Ne pas 

faire fonctionner les générateurs dans un espace 

clos (ex., pas dans une maison ou un garage). 

ACTION LABEL

ETIQUETA DE ACCIÓN

ÉTIQUETTE D'ACTION

EX

HA

UST

EL

 ES

CAP

E

L’

EC

HA

PP

EME

NT

POINT AWAY

DIRIJA ALEJADO

DIRIGER LOIN

Move to fresh air and get medical 

help if sick, dizzy or weak.

Mueva al aire fresco y obtenga 

asistencia medica si está 

enfermo, mareado, o débil.

Aller à l'air frais et obtenir de 

l'aide médicale si malade, 

étourdi ou faible.

PROCESS

Colors

LPN

1607-L-SF

Rev

B

Size

~276.4 x 82.3 mm

Artwork Notes

2mm safe margin; to be printed on white substrate

Revision Changes

B: Updated dieline

This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for 
outside parties without the explicit consent of Champion Power Equipment.

K

485

152

109

When you approach the generator to investigate a shut off, a 
blinking 

red

 LED light in the CO Shield area provides notification 

that the generator shut off due to an accumulating CO hazard. The 
red LED light will blink for at least five (5) minutes after a shutoff 
event.

Move the generator to an open, outdoor area and point the 
exhaust away from people and buildings. Once relocated to a safe 
area, the generator can be restarted, and the proper electrical 
connections made. Introduce fresh air and ventilate the location 
where the generator shut off. 

When starting, the red and yellow LED will blink ten (10) times 
simultaneously to indicate the LED is working.

 

NOTICE

This blinking does not indicate CO Shield is working, as CO 
Shield is working at all times the generator is running. Also, 
the LED will not blink (10) times if the generator was restarted 
within 1 minute after it was manually shut off. This does not 
occur if generator shut off from a high CO event.

If CO Shield system experiences a fault and no longer provides 
protection, the generator is shutoff automatically and the 

yellow

 

LED light will blink for at least five (5) minutes to notify you of the 
fault.

Call our Technical Support Team at 1-877-338-0999 for repair. 
The generator can be restarted, but will continue to shutoff. 

CO Shield will detect the accumulation of carbon monoxide from 
other fuel burning sources such as engine powered tools, or 
propane heaters used in the area of operation. If another generator 
is used and the exhaust is pointed at a CO Shield equipped 
generator, the CO Shield may initiate a shutoff due to rising carbon 
monoxide levels. This is not a fault. Hazardous carbon monoxide 

Содержание 201033



































Отзывы: