100594 - 1600 PORTABLE POWER STATION
TROUBLESHOOTING
28
Problem
Cause
Solution
Unit not charging at Solar Panel rated
wattage.
Charging wattage depends on
environmental conditions and panel
efficiency.
Adjust your solar panels to face the sun as best as
possible throughout the day to achieve maximum
charging efficiency.
It may be necessary to connect more than any
combination of 440W of solar panels to reach the
full 440W of charging power.
For example, on a cloudy day, three 150W (450W
total) rated solar panels may only produce
about 250-350W of charging power. It may be
necessary, and will not harm your Power Station
to add more solar panels to the harness until you
reach 440W of charging power.
Unit is nearing 100% battery level and is
slowing down to a safer charging rate.
The charging power and rate is reduced as the
battery level gets closer to 100% to safely charge
the internal battery.
THD Shield (Total Harmonic Distortion)
above 5%
AC power output too high
Charge Power Station. Unplug 1 or more AC
devices. See
THD Shield (Total Harmonic
Distortion)
section to turn off THD Shield.
Battery level too low
Charge Power Station. Unplug 1 or more AC
devices. See
THD Shield (Total Harmonic
Distortion)
section to turn off THD Shield.
THD too high for sensitive electronic
THD Shield disabled. Charge Power Station.
Unplug 1 or more AC devices. See
THD Shield
(Total Harmonic Distortion)
section for more
information.
For other issues and technical support:
Technical Support Team
Toll Free 1-877-338-0999
[email protected]
