100594 - 1600 PORTABLE POWER STATION
IMPORTANT SAFETY INSTRUCTIONS
12
Quick Start Label Symbols
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
Using the Power Station
NOTICE
The Power Station must be fully charged within seven (7) days
after purchase of the product and at least once every 6 months
(180 days) thereafter.
1. Ensure the Power Station is charged before operation.
2. Press and hold the
power button
for 3 seconds until display
illuminates.
3. Press
power button
once to power AC outlets. DC ports are
always live.
NOTICE
To turn THD Shield off, press THD Shield button 5x within three
seconds.
4. Plug in desired devices.
NOTICE
To protect sensitive electronics, as the Power Station’s battery
level drops below 30%, THD Shield is designed to shut off
AC power output when the AC running watts are too high
and it can no longer maintain a pure sine wave (<5% THD).
The letters “THD” will appear in red. See
THD Shield (Total
Harmonic Distortion)
section.
–
The Power Station will remain in standby mode for 4 hours,
then shut off if it does not supply at least 5 watts to an
external device or appliance. It will not shut off if it is plugged
in and charging.
Turning off the Power Station
1. Turn off and unplug all connected electrical loads.
2. Press and hold the
power button
for 3 seconds until display
turns off.
3. Charge the Power Station.
For solar charging instructions see
Using included Solar Charging
Cable
,
Recommended Solar Panels
, and
Using APP Port
.
3s
1
x
1
4
2
2
3
1
3
3s