background image

100794 - 9,000 LB. (4082 KG) WINCH

MAINTENANCE

12

 

Keep your hands clear of the winch drum and 
fairlead as the wire rope is being drawn in.

 

Secure the hook and hook strap.

 

Disconnect the remote control and store in a clean, 
dry place.

 

Clean and inspect connections and mounting 
hardware for next winching operation.

MAINTENANCE

The owner/operator is responsible for all periodic 
maintenance.

Complete all scheduled maintenance in a timely manner. 
Correct any issue before operating the winch.

 

WARNING

Never operate a damaged or defective winch.

 

WARNING

Improper maintenance will void your warranty.

 

NOTICE

For service or parts assistance, contact our help line 
at 1-877-338-0999.

Lubrication

All moving parts within the electric winch have been 
lubricated using high-temperature lithium grease at the 
factory. No internal lubrication is required.

Steel Rope Replacement

It is recommended that any modifications be performed 
by a manufacturer’s authorized repair facility, and that 
only manufacturer-supplied parts be used.

1.  Move the clutch to the “Out” position.

2.  Extend wire rope to its full length. Note how the 

existing rope is connected to the inside of the drum.

3.  Remove old wire rope and attach new one. 

4.  Retract wire rope onto drum, being careful not to 

allow kinking.

Synthetic Rope Replacement 
(Optional)

1.  It is recommended that any modifications be 

performed by a manufacturer’s authorized repair 
facility, and that only manufacturer-supplied parts 
be used.

2.  Move the clutch to the “Out” position.

3.  Extend synthetic rope to its full length. Note how 

the existing rope is connected to the inside of the 
drum.

4.  Remove old synthetic rope and attach new one.

5.  Retract synthetic rope onto drum being careful not 

to allow kinking.

Synthetic Rope

Periodically rinse the synthetic rope with water to 
remove any sand, dirt, mud, or debris that can become 
embedded or build up in the rope during use. This will 
help extend the life of the rope.

 

NOTICE

Inspect rope before and after each use. If rope 
becomes frayed it must be replaced.

Содержание 100794



















Отзывы: