aXis CONTROLLER HOME STANDBY GENERATOR
INSTALLATION
30
Wire Land
Points
Function
Wire Color
Position #5
High Engine Temperature BR (brown)
Position #6
Low oil level/pressure
Y (yellow)
Position #7
Not connected
Empty
Position #8
Fuel supply valve
G/B (green/black)
Position #9
Starter
B/W (black/white)
Position #10
Stop
L/B (blue/black)
Position #11
B+
W (white)
Position #12
B-
G (green)
Exterior Warning LED
The exterior of the generator enclosure includes a Warning LED
that illuminates RED when a fault has occurred
The Warning LED provides a visual indicator to homeowners
and service technicians that a fault has occurred, and service is
needed.
The Warning LED is located on the back-exterior panel mounted
next to the air intake louver.
Generator ON/Off Switch
This generator has an ON/OFF switch that when turned off, will
shut down the HSB (if running) and deactivate the aXis controller
preventing future starts. This switch should be used in instances
where the HSB needs to stay off regardless of utility power
presence. When the switch is in the OFF position, the HSB will not
exercise or start for any reason.
OTE:
N
If maintenance or service work is going to be performed on
the generator or the home’s electrical system, it is required
accidental startup is further safeguarded by pulling the
fuse from the aXis controller panel and disconnecting the
batteries.
When the switch is in the ON position, the aXis controller will be
energized and the HSB will be controlled by the programming of
the aXis controller. The switch needs to be in the ON position in
order for the HSB to be in AUTO mode.
ON
OFF
aXis Controller™ Module
aXis CONTROLLER MODULE STATUS ICONS
The status icons are located at the top of the aXis Controller.
Utility Pole
The utility pole icon will indicate power source when the utility is
the source of power.
Transfer Power Direction
Shows the direction of transfer power
