201001 - 5500W WIRELESS REMOTE START INVERTER GENERATOR
OPERATION
21
Wireless Set button
The wireless set button is a feature that lets the user synchronize
the remote key fob to the generator. Up to two remote key fobs
can be synchronized to the generator at a time. Follow the
proceeding steps to reset a remote or synchronize two remotes:
1. Turn the fuel dial to the “ON” position.
0000
-X
-X
X-
A
ECO
2. Press the ignition control button to enter standby mode.
000
0-X-
X
X-
A
ECO
3. Push and hold the wireless set button found on the
Intelligauge for approximately three seconds until the button
LED illuminates blue.
000
0-X-
X
X-
A
ECO
4. Push and release the STOP
$
button on the remote key
fob. The green LEDs on the remote key fob and the Ignition
Control Button will blink once simultaneously to indicate
program is erased and generator is ready for pairing.
5. Push and release the START
a
button on the remote key
fob. The green LEDs on the remote key fob and the Ignition
Control Button will blink once simultaneously to indicate
program is erased and generator is ready for pairing.
6. Push and hold the wireless set button for approximately three
seconds until the blue LED on wireless set button turns off.
000
0-X-
X
X-
A
ECO
7. Follow the remote START and STOP instructions to verify the
remote(s) are working properly.
NOTICE
Two remote key fobs can be synchronized to the generator at
one time. If pairing second remote and do not want to erase
programming on current remote, skip step 4.
