MAIN MENU
COMMAND
DESCRIPTION
LEARN MENU
LEARN DEVICE
Program a device to the receiver.
LEARN TO LOC #
Program a device to a 4-digit number location.
QUERY MENU
LOC # USED
Displays a range of used locations starting from a specified location.
LOC # AVAILABLE
Displays a range of empty locations starting from a specified location.
LOC # SUSPENDED
Displays a range of suspended locations starting from a specified location..
SUSPEND MENU
SUSPEND DEVICE
Temporarily disables the function of a specified device that has been programmed to the receiver.
SUSPEND ALL DEVICES
Temporarily disables the function of ALL devices programmed to the receiver.
UNSUSPEND DEVICE
Re-enable the function of a suspended device.
UNSUSPEND ALL DEVICES
Re-enable the function of ALL suspended devices.
SETTINGS
CHANGE PIN
Change the 6-digit PIN number for the receiver.
DEALER INFO
Display and edit the dealer contact phone number.
FIRMWARE VERSION
Displays the current firmware version.
BEEP
Turn the audible feedback on or off.
MEMORY
DUPLICATE MEMORY
Creates a memory backup. A backup memory module must be installed.
RESTORE MEMORY
Restores a memory backup from a memory module.
NOTE: Content of memory backup module will over-write any
information already stored in the receiver memory.
RELAY
Sets the relay activation time from .25 to 1 second.
CONTRAST
Press Down or Up arrows to adjust LCD contrast.
LANGUAGE
Sets menu language: English (Default), Spanish, and French.
FACTORY DEFAULT
Reset receiver to factory default settings.
DELETE MENU
DELETE DEVICE
Delete a specified device that has been programmed to the receiver.
DELETE ALL DEVICES
Delete all programmed devices.
PROGRAMMING COMMANDS*
The table below describes the commands used to program the receiver.
EVENT
AUDIBLE
NOTIFICATIONS
ON/OFF
Key press
Single
YES
Successful Add
Double
Successful Delete
Triple
Successful Suspend
Double
Successful Unsuspend
Double
Master PIN entry error
Long
Programming error
Long
Location out of range
Long
Generic Success
Double
Generic Error
Long
Received unknown Tx
Slow
YES
Received known Tx
Double
YES
Received known suspended Tx
Long
YES
DIAGNOSTICS
The receiver emits a series of audible beeps to signal programming and error
events. The table at right lists all of the events and their audible notifications.
The On/Off column indicates that the audible notification for the event may be
disabled in the BEEP SETTINGS menu.
SPECIFICATIONS
System Capacity..........................................................................
1000 devices
Supply Voltage............................................................................
9 - 30 Volts AC, 9 - 42 Volts DC
Operating Current........................................................................
50 mA Maximum
Stand By Current.........................................................................
30 mA Maximum
Surge Suppression......................................................................
6.0 kV Min
Operating Temp Range...............................................................
-40°C to +65°C @ 50% Rh
Storage and Shipping Temp Range.............................................
-40°C to +85°C @ 50% Rh
Frequency....................................................................................
EVO Code, S 2.0™ (433, 868 MHz)
Relay Contact Rating...................................................................
1 amp @ 24V AC/DC
COMPATIBLE ACCESSORIES*
Remote Controls..........................................................................
TX2EV/S, TX4EV/S/F, TX4UNI/S/F
Keypads.......................................................................................
747EV
12 V DC Transformer
**
(optional, indoor use only) ..................
UPS-TDX
Hereby, Chamberlain GmbH declares that the access control receiver type Star1000EV is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://chamberlain.de/Chamberlain/media/Chamberlain/CE/DoC_Star1000EV.pdf
*Further information: liftmaster.eu
The packaging must be disposed of in the local recyclable containers. According to the European Directive 2002/96/EC on waste electrical equipment, this device must be properly dis-
posed of, after usage in order to ensure a recycling of the materials used. Old accumulators and batteries may not be disposed of in the household waste, since they contain pollutants
and must be properly disposed of in municipal collection points or in the containers of the dealer provided. Country-specific regulations must be observed.
* Compatible list: liftmaster.eu
**
Power supply must be used according IEC62368-1 Type PS2.
(Optional - 12 V DC Transformer Model TDX-1200500 indoor use only (SKU: UPS-TDX)
