3
Programming
CONNECT POWER TO THE WI-FI HUB
1. Plug the power supply into an AC outlet, then into the Wi-Fi Hub. The blue LED will
blink.
PRE-INSTALLATION REQUIREMENTS:
• Compatible Garage Door Openers:
-
LiftMaster
®
with purple, yellow, green, or orange LEARN button
(310, 315, and 390 MHz) (
Chamberlain, Do-It, Master Mechanic, Raynor, True Value
and Sears Craftsman are compatible with LiftMaster technology.)
-
Genie
®
/Overhead Door
®
Intellicode I and II (315 and 390 MHz)
-
Linear
®
Mega Code (318 MHz)
-
Stanley
®
Secure Code (310 MHz)
-
Wayne
Dalton
®
Keeloq (372.5 MHz)
• Verify there is a wireless router and broadband Internet connection at the site.
• Wi-Fi Hub Serial Number (located on the bottom of the Wi-Fi hub or with the Wi-Fi
Setup card)
For more information about compatible garage door openers, visit www.myliftmaster.com.
Introduction
Wi-Fi Hub
Power Supply
Door Sensor
LED
Test BUTTON
