6
INSTALL THE DOOR SENSOR
INSTALL THE WI-FI HUB
1. Install the bracket for the Wi-Fi hub on the
ceiling near the garage door opener. Use
the bracket as a template and mark holes
for the bracket. Be sure the Wi-Fi hub is
visible when standing in the path of the
door.
2. Slide the Wi-Fi hub onto the bracket.
3. Connect to AC power.
The blue, green, and yellow LEDs on the
Wi-Fi hub will blink momentarily indicating a
successful power up. Then the blue LED will
blink indicating the Wi-Fi needs to be setup.
Installation
The installation is complete and ready to be connected to the home’s
wireless (Wi-Fi) network.
IMPORTANT:
Leave the Wi-Fi Setup card with the homeowner to
complete the Wi-Fi setup.
Bracket
Anchors
Screws
Wi-Fi Hub
Light
LED
Front
Cover Screws
Test BUTTON
Top Panel
of Garage Door
Top Panel
of Garage Door
Fastening
Strips
Door
Sensor
Top
OR
1. Position the door sensor vertically and
attach to a clean, dry location on the top
panel of the garage door with fastening
strips (provided).
OR
Press in the bottom of the door sensor
and remove the front cover. Position the
door sensor vertically and attach to the
top panel of the garage door with screws
(provided). Replace the front cover.
