9
TIGHTEN THE BEARING COVER SCREWS
1. Re-tighten the four bearing cover screws by turning them
three times clockwise until snug.
REPLACE THE TROLLEY PIN
1. Align the holes for the drive screw and the collar from the
Passpoint assembly.
2. Insert the trolley pin back into the hole.
3. Return the retaining ring to the retaining groove. Make sure
that the circumference of the retaining ring covers the trolley
pin, instead of the gap between the retaining ring’s free ends.
4. The drive screw can no longer be turned by hand.
Trolley Pin
Retaining Ring with
Free Ends
Retaining Groove
Drive Screw
Bearing Cover Screws
Passpoint Assembly
Bypass Release Lever
Retaining Ring
over
Trolley Pin
Trolley Pin
