Challenge TITAN 265 XG, Руководство оператора

Страница: 42 / 52

7.0 Knife Installation/Changing
42
Figure 21
3. Remove the knife bolts from the two slotted knife bar holes and replace with the knife lifters
(Figure 22) . Tighten the lifters to hold the knife in place, and then remove the remaining knife
bolts.
Figure 22
4. Clear the table surfaces and place the empty knife scabbard on the table. Remove the
scabbard’s knife retaining screws.
5. Grasp the knife lifters firmly and, at the same time, turn them counterclockwise to release the
knife from the knife bar (Figure 23). Lower the left end first, then lower the right end as you
shift the knife sideways to the left. Bring the right end of the knife out from the machine. Shift
the knife to the right and bring out the left end. Put the blade in the scabbard immediately and
secure the knife retainer screws.
Figure 23
Knife Adjusting Screws