Challenge Xtreme PFS200F, Оригинальное руководство пользователя

Страница: 9 / 12

HELPLINE NO 08448012949
9
OrIgINaL INstructIONs
3. OPEratINg tHE ON/OFF sWItcH
(see Fig. F, g)
Slide the on/off switch to the position marked”I” to
start the machine. (see Fig. F)
Slide it to the position marked “0” to stop it. (see
Fig. g)
4. Dust EXtractION aDaPtEr (see Fig. H)
Your sander is equipped with a dust extraction
adapter, which is designed for collect dust task.
Insert the dust adapter into the rear dust outlet of
sander. Then pull the dust adapter and make sure
it is tightened securely on the dust outlet. Then
connect the hose of a vacuum cleaner.
First please turn on the vacuum cleaner, and then
turn on the sander. If you stop sanding, first turn
off the sander, and then turn off your vacuum
cleaner.
5. usINg tHE saNDEr
The work piece to be sanded must be secured. If
it is small or it may move during sanding, it must
be held in a vice or suitably clamped.
Be sure to hold the sander firmly whilst it is on
and apply it gently to the work, it may “kick” on
first contact. Hold the sander so that it is flat
on the work and move slowly, preferably with
a smooth, circular motion. Regularly check the
condition of the sanding paper and replace when
worn for best results.
WOrKINg HINts FOr YOur
saNDEr
1. Your sander is useful for working on wood,
metal, painted surface. It will smooth surfaces
prior to painting, even where fillers have been
used and left proud.
2. Your sander is best suited to large flat areas
such as doors but can also be used on skirting
boards, windows, etc, provided they are
accessible.
3. Different types of sanding paper will allow
the sander to meet various needs. Different
grades of sanding paper are available, the
higher grade number, the finer the grit. For
rough work start with a low grade of grit (i.e.
Fig. A
Fig. B
Fig. C
Fig. D
Fig. E1
Fig. E2
Fig. G
Fig. H
Fig. F
Fig. A
Fig. B
Fig. C
Fig. D
Fig. E1
Fig. E2
Fig. G
Fig. H
Fig. F
Fig. A
Fig. B
Fig. C
Fig. D
Fig. E1
Fig. E2
Fig. G
Fig. H
Fig. F