Challenge Xtreme PFS200F, Оригинальное руководство пользователя

Страница: 7 / 12

HELPLINE NO 08448012949
7
OrIgINaL INstructIONs
tEcHNIcaL Data
Type PFs200F (PFs-designation of machinery, representative of Finishing sander)
Voltage 230-240V~50Hz
Rated power 200W
No load speed 12000/min
Base size 90*187mm
Protection class /II
Machine Weight 1.6kg
NOIsE INFOrMatION
A weighted sound pressure L
pA
:78dB(A)
A weighted sound power L
wA
:89dB(A)
K
PA
&K
WA
3.0dB(A)
Wear ear protection when sound pressure is over 80dB(A)
vIBratION INFOrMatION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
Vibration emission value a
h
= 5.37m/s
2
Uncertainty K = 1.5m/s²
WarNINg: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
To use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WarNINg: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
o
C or less.
Plan your work schedule to spread any high vibration tool use across a number of days.