Challenge Xtreme PFS200F, Оригинальное руководство пользователя

Страница: 3 / 12

HELPLINE NO 08448012949
3
OrIgINaL INstructIONs
dangerous and must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
5) sErvIcE
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
aDDItIONaL saFEtY ruLEs
1) Always wear eye protection.
2) Always wear ear protection during extended
periods of operation.
3) Always wear a dust mask.
4) Always inspect and remove all nails and
screws etc before sanding.
5) Always check walls and ceilings to avoid
hidden power cables and pipes. A metal
detector can be obtained from any good DIY
store for this purpose.
6) Use the original accessories and the tool
provided, no others.
7) If the replacement of the supply cord is
necessary, this has to be done by the
manufacturer or his agent in order to avoid a
safety hazard.
8) Only use accessories in good condition. Do
not use torn or worn accessories.
9) Do not use a damaged plug or cord, if
damaged have them repaired. Always be
aware of the cord location.
10) Do not abuse the cord. Never use the cord to
carry the tools or pull the plug from the outlet.
Keep cord away from heat, oil, sharp edges
or moving parts. Replace damaged cords
immediately.
11) Do not turn the machine on whilst any of the
accessories are resting on or inserted into the
work piece or material that you want to work
with. Wait until the machine is up to full speed
before proceeding with your task.
12) Unplug your tools before mounting or
replacing accessories.
13) Keep your hands away from cutting area. Do
not reach under the material being cut.
14) The operating instructions and the enclosed
safety information should be kept carefully
for later use and enclosed with the machine,
should it be passed on or sold.