Challenge Xtreme BVA2400, Инструкция по эксплуатации

Страница: 5 / 14

safety devices for example debris collector
in place.
y
Only use a weather proof extension
cord fitted with a coupler according to IEC
60320-2-3.
3. OPERATION
y
Always direct the cord to the rear
away from the appliance.
y
If a cord becomes damaged during
use, disconnect the supply cord from the
mains immediately. DO NOT TOUCH THE
CORD BEFORE DISCONNECTING THE
SUPPLY.
y
Do not carry the appliance by the
cord.
y
Disconnect the appliance from the
mains supply:
a) Whenever you leave the machine;
b) Before clearing a blockage;
c) Before checking, cleaning or working
on the appliance;
d) If the appliance starts to vibrate
abnormally.
y
Operate the appliance only in daylight
or in good artificial light.
y
Do not overreach and keep your
balance at all times.
y
Always be sure of your footing on
slopes.
y
Walk, never run.
y
Keep all cooling air inlets clear of
debris.
y
Never blow debris in the direction of
bystanders.
4. MAINTENANCE AND
STORAGE
y
Keep all nuts, bolts and screws tight
to be sure the appliance is in safe working
condition.
y
Check the debris collector frequently
for wear or deterioration.
y
Replace worn or damaged parts.
y
Use only genuine replacement parts
and accessories.
y
Store the appliance only in a dry
place.
If an extension cord is used make sure it is
for outdoor use and marked as such. The
recommended size of extension cord is
not lighter than a 1.0mm and a maximum
of 10 meters in length.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible for their
safety.
If the supply cord is damaged, it must be
replaced by a special cord or assembly
available from the manufacturer or its
service agent.
SYMBOL
DESCRIPTION
In accordance with essential
applicable safety standards of European
directives.
The tool is double insulated. This
means that all the external metal parts are
electrically insulated from the mains power
supply. It unnecessary for the tool to earth.
Warning.