Challenge Xtreme BVA2400, Инструкция по эксплуатации

Страница: 2 / 14

SAFETY
INSTRUCTIONS
WARNING! When using power tools,
basic safety precautions should always
be taken to reduce the risk of fire,
electric shock and personal injury. Also,
please read and heed the advice given
in the additional safety rules .
1. Keep the workplace clean and tidy.
Cluttered work areas invite accidents and
injury.
2. Consider the environment in which you
are working. Do not use power tools to
in damp or wet locations . Keep the work
area well lit. Do not expose power tools to
rain or high humidity. Do not use power
tools in the presence of flammable liquids
or gas.
3. Keep visitors away from the worksite.
All visitors and onlookers, especially
children and infirm persons should be kept
well away from where you are working. Do
not let others in the vicinity make contact
with the tool or extension cord.
4. Store tools safely. When not in use,
tools should be stored in a dry, high place
or locked up out of the reach of children.
5. Do not force the tool. The tool will do
the job better and more safely working at
the rate for which it was designed.
6. Use the correct tool for the job. Do
not force small tools or attachments to do
the job best handled by a heavy dust tool.
Never use a tool for a purpose other than
that for which it was intended.
7. Dress correctly. Do not wear loose
clothing or jewelry. They can be caught in
moving parts. Rubber gloves and non-slip
footwear are recommended when working
outdoors. If you have long hair, wear a
protective hair covering.
8. Use safety accessories. Safety
glasses and ear protectors should always
be worn. A face or dust mask is also
required.
9. Do not abuse the power cord. Never
pull the cord to disconnect the tool from
the power point. Keep the cord away from
heat, oil and sharp edges.
10. Look after your tools. Keep tools
clean for better and safe performance and
follow the instructions regarding
lubrication and accessory changes.
Inspect extension cords periodically and
replace them if damaged. Keep tool
handles dry, clean and free from oil and
grease.
11. Disable idle tools. Switch off the
power and disconnect the plug from the
power before servicing, when changing
accessories and when the tool is not in
use.
12. Avoid unintentional starting. Always
check that the switch is on the OFF
position before plugging the tool to the
power supply. Do not carry a plugged in
tool with your fingers on the switch.
13. Use outdoor rate extension cords.
When a tool is used, use only extension
cords that are intended for outdoor use
and are so marked.
14. Stay alert. Watch what you are doing.
Use common sense. Do not operate a
power tool when you are tired.
15. Check for damage parts . Before
using a tool, check that there are no
damaged parts. If a part is slightly
damaged, carefully determine if it will
operate properly and perform its intended
function. Check for alignment of moving
parts, binding of moving parts, breakage of
parts, proper mounting and any other
conditions that may affect the operation of
the tool. A guard or other part that is
damaged should be properly repaired or