Challenge Xtreme BVA2400, Инструкция по эксплуатации

Страница: 11 / 14

MAINTENANCE AND
AGE STOR
supply
Warning! Always switch off and
disconnect from the mains
before starting any cleaning or
maintenance procedures.
Cleaning
1. Remove the collection bag. (Dia.6)
2. Empty the collection bag.
3. With eye protection on, turn the bag
inside out and vigorously shake out
dust and debris.
4. Keep the shredder chamber, vacuum
tube and shredder fan, clean an
unblocked.
5. Keep the cooling vents clean and clear
of debris.
Clearing blockages
1. Remove the collection bag.
2. Check fan for blockages.
3. Make sure that the fan is free to rotate
and that it is not damaged in any way.
Do not use the garden vac if the fan is
damaged.
These are no user serviceable parts in the
blower vac. If a fault is suspected return
the blower vac to an authorized dealer for
repair.
4. Rotate the function selector to check
for any other blockages.
5. Clear fan and the chamber of any
blockages.
6. Check the vacuum tube is clear of
blockages before refitting the
collection bag.
Troubleshooting
If the blower vac will not operate, check
plug fuse and power at main plug.
There are no user serviceable parts in the
blower.
Note: If a fault is suspected return the
blower vac to an authorized dealer for
repair.
Maintenance
Apart from keeping the blower vac
clean and unblocked, there are no user
maintenance procedures to be carried
out. Refer to qualified service
personnel if any repairs or internal
maintenance is required.
1. Store the tool, instruction manual and
accessories in a secure, dry place. In
this way you will always have the
information ready to hard.
2. Keep the tool’s air vents unclogged
and clean at all times.
3. Remove dust and dirt regularly.
Cleaning is best done with a rag or
brush.
4. Never use caustic agents to clean
plastic parts.
Caution: Do not use cleaning agents to
clean the plastic parts of the tool. A mild
detergent on a damp cloth is
recommended. Water must never come
into contact with the tool.
5. Empty the vacuum bag after each use
to avoid deterioration, and air flow
obstruction both of which will reduce
the performance of the tool.
6. Clean the bags as required. Put on
eye protection, turn the bag inside out,
empty debris and vigorously shake out
dust and residual debris.
7. Wash the bag at least once a year:
z
Remove the vacuum bag tube.
z
Turn the bag inside out.
z
Wash the bag by hand in soapy water.
Rinse and allow to thoroughly dry before
re-use.