CHAINTECH CT-6BPV, Руководство пользователя

Страница: 42 / 56

User's Manual
38
B. USB Keyboard Support
If your current operating system doesn't support USB drivers (i.e., DOS) this
function must be enabled for USB keyboard operation in these operating systems.
@
When using a USB keyboard this function is automatically Enabled during
bootup regardless of its setting in BIOS.
C. Onboard Sound Chip
This function must be enabled in order to use the onboard audio function. To
terminate this function set it to disable.
D. GAMEPORT Support
This function allows you to enable or disable the gameport support.
E. Onboard LAN Chip
This function must be enabled in order to use the onboard LAN function. To
terminate this function set it to disable.
F. Init Display First
This function allows user to choose between AGP slot or VGA slot to initialise
Display first .
G. Power On Function
Set to Button Only to control the system power via the button on your system
case. Set to Mouse Click to turn on the power via a PS/2 mouse, and set to
Hot Key or Password to turn on the power via keyboard. With Hot Key and
Password you must decide on which keys will turn on the power.
H. Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on
the system board and you wish to use it. If you install an add-in FDC or the
system has no floppy drive, select Disabled in this field.
I. COM2 Mode
When this function is Enabled, then the COM port will be redirected to support
IR function.
J. Onboard Parallel Port
Select a logical LPT port address and corresponding interrupt for the physical
parallel port.
K. Power Failure Recovery
Computers using an ATX power supply do not turn back on after the power source
to the computer unexpectedly fails (i.e. electricity outage). Enabling this setting
will allow the system to always turn back on after a power failure. This is especially
important for computers that must be on 24 hours per day.