Hardware Setup
15
PS/2 Mouse and Keyboard Ports
If a PS/2 mouse is used, BIOS will automatically detect
and assign IRQ12 to the PS/2 mouse.
Clear CMOS Data Jumper (JP2)
To clear the contents of the CMOS, please follow the
steps below.
1.Disconnect the system power supply from the power
source.
2.Set the jumper cap at location 2~3 for 5 seconds, then
set it back to the default position.
3.Connect the system's power and then start the system.
4.Enter BIOS's CMOS Setup Utility and choose Load
Setup Defaults. Type Y and press enter.
5.Set the system configuration in the Standard CMOS
Setup menu.
Keyboard Power-on Function Jumper (JP3)
This board is able to be turned on by the keyboard (hot
key/Password) or mouse click. To use this function, select
a device of your choice at the Power on Function option
in BIOS's Integrated Peripherals screen (See section 3-
8). You must also set this jumper's cap to pins 2-3 to use
this function. Some out-of-date keyboards may require
larger current than supplied by the Suspend 5V of modern
power supplies. When using older keyboards disable this
function.
Normal (default)
1
1
Clear CMOS data
1
1
Disabled
Enabled
Pin
Definition
1
Data
2
No Connect
3
Ground
4
+5V (fused)
5
Clock
6
No Connect
Содержание CT-6BPV
