CHAINTECH CT-6BPV, Руководство пользователя

Страница: 32 / 56

User's Manual
28
3-4 Power Management Setup
This section provides information on the Green PC power management funtcions.
By choosing the Power Management Setup option from the CMOS Setup Utility menu
(Figure 3-1), the screen below is displayed. This sample screen contains the
Figure 3-5 Power Management Setup Screen
ROM PCI / ISA BIOS (2A69JC39)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
:Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color
ESC : Quit
F1
: Help
F5 : Old Values
F7 : Load Setup Defaults
ACPI Function : Enabled
Power Management
: User Define
PM Control by APM : Yes
Video Off Method : DPMS
Video Off After : Standby
MODEM Use IRQ : 3
Doze Mode : Disabled
Standby Mode : Disabled
Suspend Mode : Disabled
HDD Power Down : Disabled
Throttle Duty Cycle : 62.5%
Soft-Off by PWR-BTTN : Delay 4 Sec.
CPUFANOff In Suspend : Enabled
Power On By Modem
: Disabled
Power On By Alarm : Disabled
Wake Up On LAN : Disabled
IRQ 8 Break Suspend : Disabled
A. Advanced Configuration Power Interface (ACPI)
ACPI management enables the operating system to control the amount of power
given to each device attached to the computer. With ACPI, the operating system
can turn off peripherals devices, such as CD-ROM players, when they are not
in use.
B. Power Management
Power management allows the computer to save electricity when it is not in use
by entering increasingly deep power saving modes as shown by the diagram below.
Figure 3-6 Power Saving Mode Flow Chart
** Reload Global Timer Events **
IRQ[3,7,9,15],NMI : Disabled
Primary IDE 0 : Disabled
Primary IDE 1 : Disabled
Secondary IDE 0 : Disabled
Secondary IDE 1 : Disabled
Floppy Disk : Disabled
Serial Port : Enabled
Parallel Port : Disabled
Mouse Break Suspend : Yes