CHAINTECH CT-6BJM, Руководство пользователя

Страница: 5 / 58

1
Introduction
+D=FJAH
Introduction
1-1 Product Specifications
! ! ! ! !
Processor
- Support Intel Celeron/ Coppermine processors up to 700MHz
- Supports 66/100 MHz system clock speeds
- High efficiency switching power modules (VRM 8.4 compliant)
! ! ! ! !
Chipset
- Intel 82440BX two chip AGPset
! ! ! ! !
DRAM Memory
- Four 168-pin DIMM sockets support up to 1GB SDRAM
- Provides single-bit ECC capability
! ! ! ! !
Expansion Slots
- One 32-bit AGP slot (Rev 2.0 compliant)
- Five 32-bit PCI slots (Rev 2.2 compliant)
- Two 16-bit ISA slots (one PCI/ISA shared slot)
! ! ! ! !
2Mb Boot-Block Flash ROM
- Award System BIOS, supports PnP, APM, DMI & Multi-device booting
features i.e. floppy, LS120, CD-ROM, HDD(IDE, SCSI), ZIP-ATAPI etc.
- Includes SYMBIOS SCSI BIOS
- BIOS Wonder technology including ChipAway Virus, Flash Write Protect, Embedded
Flash Utility, built-in Hard Disk Backup firmware
- Optional TWIN BIOS with Instant BIOS Recovery for triple BIOS insurance
! ! ! ! !
Two Ultra DMA-33 IDE Ports
- Supports up to PIO Mode 4, Multi-word Mode 2 and Ultra DMA-33 timings
- Bus Mastering software drivers for all well known multi-tasking operating
systems
! !
! !
!
On-board I/O Functions
- ITE 8693 I/O chip with keyboard controller
- One floppy disk drive connector supports up to 2.88MB, Japanese 3-Mode,
and 1Mbps transfer rate
- Two UARTs support two serial ports and IR function (up to 115.2Kbps) for
HPSIR and ASKIR
- One parallel port supports SEPP/ECP/EPP