CF MOTO V NIGHT CF150-2C, Руководство пользователя, Страница: 51 / 68

-4 6-
[Adjustment and Replacement]
WARNING
[Adjustment of Rear Brake Lights]
1 . It is necessary to replace the brake pad, when limit wear thickness reaches 1.5mm.
2 . It is necessary to replace the brake disc, when limit wear thickness reaches 3 mm ;
When replacing the brake disc, it is necessary to dismantle the drive chain
，
rear axle nut and rear axle,
rear brake positioning nut and rear wheel and take out the rear brake for replacemnt. This task shall be done
in the
“
CFMOTO Service Station or authorized local dealer
”.
1. After adjusting the rear brake system, it is necessary to commission and inspect the
vehicle;
2. Step on the rear brake pedal several times, release the brake pedal and rotate the rear
wheel to check whether it can rotate flexibly.
3. After adjusting the rear brake system, confirm that the brake pedal returns flexibly and
braking force is normal;
4. If adjustment is not in place, please send it to the “CFMOTO Service Station or authorized
local dealer” for adjustment.
Installation of the rear brake light switch : inside the right rear pedal side stand of the engine ( refer to
Figure21 of Page 43
).
Adjustment method : it turns on too late, turn the mounting nut in counterclockwise.
If it turns on too early, turn the mounting nut in clockwise direction.