- 41-
(7)Inspection, Adjustment and Lubrication of the Drive Chains
[Inspection and Lubrication of the Drive Chains]
The drive chain includes many mutually operated parts and its service life depends on good lubrication and
appropriate adjustment. Negligence of chain maintenance and service will result in premature wear of the
chains and sprocket wheels. Therefore, regular chain maintenance is necessary.
If the drive chain, small and large sprocket wheels reach their wear limit, it is necessary to replace them.
The inspection procedure is as follows:
1
.
Switch to the neutral gear and the engine stops
(
take out the key
);
2
.
Place the fingers on the
①
drive chain and swing the chain up and down. The normal amplitude range
is
:
between 10
～
20mm
;
3
.
Check wear
conditions
of
various
chain
links
of
the
drive
chain
.
If
there
is
missing
or
damage
or
over
wear
or
overlength
of
the
chain
link
,
replace
such
chain
link
;
4
.
Check wear conditions of the large and small sprocket wheels. If the wheel teeth are seriously worn,
missing or broken, replace
the
wheels.
When lubricating:
1
.
Clean the drive chain, large and small sprocket wheels and add moderate engine oil to or spray
lubricating oil on the cleaned drive chain, large and small sprocket wheels.
2
.
Clean and lubricate one time for driving 500km
;
in the dusty areas, increase such maintenance frequency.
Содержание V NIGHT CF150-2C
Страница 1: ...V NIGHT Motorcycle CF150 2C OWNER S MANUAL...
Страница 65: ...60 16 WIRING DIAGRAM CF150 2C...