CF MOTO V NIGHT CF150-2C, Руководство пользователя, Страница: 39 / 68

-3 4-
[Inspection of the Lubricating Oil]
When the lubricating oil is insufficient, the engine will be seriously damaged.
WARNING
Check the lubricating oil level before each application.
There is oil window on the right crankcase:
The oil surface should be at the scale line of the oil window
(
Figure14
).
1
.
During inspection, the longitudinal plane should be perpendicular to the level ground.
2. When lubricating oil is insufficient, add moderate engine oil at SAE15W-40/SG grade
or above until the scale line of the oil window.
3. Install the screw plug of the oil filler and check oil leakage.
[Change of Lubricating Oil]
1 . For the new motorcycle purchased by the user , replace the lubricating oil according to the standard of
“
run-in period
” .
2
.
The replacement cycle after run-in period is
:
every 1500 km
.
3 . Before change : Stop the engine after fully warming and then drain the lubricating oil of the engine
( caution: do not be scalded by the hot engine or the lubricating oil ).
4
.
During change
:
Place one empty oil box under the engine
,
unscrew the drainage bolt and unscrew
3
nuts to take out the filter cover
,
spring and element
.
5 . After oil drainage, it is necessary to clean the drainage bolt and oil filter cover ; replace the machine oil
filter element
,
check whether the sealing ring is good and replace it if it is damage
;
then install the filter
screen , spring , sealing ring and machine oil filter cover .
6 . Add about 1.2L new lubricating oil from the oil filler . If replace the oil filter element at the same time ,
it needs to add 1.25 Lunused lubricating oil and install the oil filler screw plug after leakage check.