Cetrek PROPILOT 700, Руководство по установке и обслуживанию

Страница: 28 / 40

-28-
PROPILOT 700 INSTALLATION & SERVICING MANUAL
807-007-5-96
C O R R
C L R
i N i T
R u n
C O R R
Once the LCD displays ‘
CLR
’ set the vessel on a slow
clockwise turn and press the < and > keys simultaneously.
The display will inform you that the auto deviation
correction routine has been initialised.
After 60º of turn the LCD will change to display ‘
run
’.
Continue the slow clockwise turn until the LCD changes to
display ‘
CORR
’, usually 2¼ turns.
If the display still indicates ‘
run
’ then the vessel has been
turned too quickly and requires an additional turn at a
slower rate.
This completes the Auto deviation correction routine. Press
the OFF or ADJ key to return to the mode you require.
You should now check that the compass heading agrees
with the vessel’s true heading and does not need manually
realigning. The compass should also be checked against
known headings to check the accuracy of the compass
(known headings could be obtained either from an accurate
magnetic compass or from transits).
W A R N I N G Changed values are not automatically stored until you
press the AUTO key then OFF key. Therefore store the
settings as soon as it is practical and safe to do so.
Sea Trials