-24-
PROPILOT 700 INSTALLATION & SERVICING MANUAL
807-007-5-96
Navigator
This
is
the
window
to
set
the
signal
Gain
for
the
navigator.
Gain
Its
value
can
be
between
0
and
9.
Initially
set
it
to
05
then
fine
tune
it
during
Sea
Trials.
To
enter
the
settings
window
press
and
hold
the
ADJ
key,
on
power
up,
until
‘
CONF
’ is displayed. Then press the
ADJ key until ‘
NG
’ is displayed, the value can then be
altered using the < and > keys.
If the navigator gain control is set too high the vessel, when
under navigator control, will make large step corrections to
return the vessel to track. The gain of the navigator should
be set as high as possible without this effect being induced.
Power Steer
This adjusts the sensitivity of the steering when it is
Gain
controlled by a remote device such as a 930 729
Proportional Control. The range is from 0 (least sensitive) to
9 (most sensitive).
Compass
This sets the amount of damping applied to the readings
Damping
from the heading sensor to avoid rapid changes of the
heading display. The range is from 0 minimum damping to
9, maximum damping. Generally, the higher the sensor is
above the waterline, the more damping is required.
Compass Damping is one element of the standard
configurations preprogrammed into the autopilot’s
memory. As with the other configurations the damping can
be fine tuned as you become more familiar with the
Autopilot.
To access the settings window press and hold the ADJ key,
on power up, until ‘
CONF
’ is displayed, then press the
ADJ key until ‘
Cd
’ is displayed, the value can then be
altered using the < and > keys.
Auto-deviation
This allows access to the automatic deviation correction
procedure for the heading sensor and is explained in the
following section, Sea Trials.
To Exit
To exit from the installation settings routine at any stage,
press the AUTO key then the OFF key. This ensures that
the autopilot remembers the settings you have just
programmed in.
P G
CLR
or
CORR
C d
Configuring
Your
Autopilot
N G
Содержание PROPILOT 700
Страница 4: ... 4 PROPILOT 700 INSTALLATION SERVICING MANUAL 807 007 5 96 The System ...
Страница 14: ... 14 PROPILOT 700 INSTALLATION SERVICING MANUAL 807 007 5 96 InstallationSchematic ...
Страница 37: ... 37 PROPILOT 700 INSTALLATION SERVICING MANUAL 807 007 5 96 Rudder Angle Template ...
Страница 38: ... 38 PROPILOT 700 INSTALLATION SERVICING MANUAL 807 007 5 96 ...