CETONI Nemesys S Hardware Manual
11
It is the user's responsibility to become familiar with the mentioned Pressure Equipment Directive
and to comply with the prevailing requirements.
•
Wear protective glasses and, if necessary, additional personal protective equipment when
working with corrosive, hot or otherwise dangerous substances during assembly work on the
device.
•
Transportation, storage or operation of the devices below 0°C with water in the fluid passages
may cause damage to the modules.
2.4.5
Measures for Safe Operation
2.4.5.1
ELECTROMAGNETIC EMISSIONS
The CETONI Nemesys S is intended for use in any type of facility, connected directly to the public power
supply network that supplies buildings used for domestic purposes.
2.4.5.2
ELECTROSTATIC DISCHARGE
Floors should be made of wood, concrete, or ceramic tiles. If the flooring is made of a synthetic material;
the relative humidity must be at least 30%.
2.4.5.3
ELECTRIC DISTURBANCES
The quality of the supply voltage should be to the standard of a typical business or hospital environment.
2.4.5.4
MAGNETIC DISTURBANCES
Do not place power connector cables, even of other appliances, in close proximity of the devices and their
cables. Mobile communication devices may not be used in closer proximity of the devices or their cables
than the recommended safety distance!
2.4.5.5
SAFETY DEVICES ON THE SYSTEM
The system can be switched off at any time in an emergency using the mains switch on the Base Module
(toggle switch on the side of the housing); this will cause no damage to the unit.
2.4.5.6
CONDITION OF THE DEVICES
Irrespective of the faultless manufacture of the devices, damage can occur whilst the unit is in operation.
With this in mind, always carry out a visual check of the components mentioned before use. Pay particular
attention to crushed cables, damaged tubing, and deformed plugs. If you should notice any damage,
please do not use the devices and inform CETONI GmbH without delay. CETONI will put your devices
back to an operational condition at the earliest. Do not attempt to repair the devices yourself.
