Cetetherm Midi Wall TA
Installation, service and operating instruction
27
10.3 Mounting floor stand
1. Mount two floor supports to the central. Use the outer mounting holes.
2. Mount the floor stand feet on the floor support.
3. Raise the central against a wall.
4. We recommend that the central is mounted to the wall.
The distance between floor and screw bracket should be 1330 mm. Note that distance between screws
are 400 mm.
Picture 28
Picture 29
10.4 Mounting actuator
1. Mount the actuator on the valve, slide the actuator onto the valve neck, thus making the square nut on the
valve spindle fit into the groove on the cross bar. Then slide the brace into the groove on the valve neck
and secure the nuts
2. Remove the actuator lid an attach the wirings.
3. Raise the operation handle on the actuator to start the motor.
With supply temperatures above 100°, it is recommended that the actuator is tilted or put down.
Picture 30
