SOLOY TURBINE PAC
SOLOY SUPPLEMENT NO. 1
POHS CESSNA U/TU 206G
EXHAUST HEAT
EXCHANGER KIT
1 of 4
F.A.A. Approved
October 4, 2005
SUPPLEMENT NO. 1
BLEED AIR HEATER KIT
SECTION 1
GENERAL
The installation of an exhaust heat exchanger kit will provide cabin heater
air. Outside air enters from an inlet in the cowl, through a heat exchanger
mounted within the left hand engine exhaust duct and enters the existing
aircraft manifold through the existing firewall heater valve. When the
valve is closed, the heater air is ducted outboard. To provide this
capability, the following items are installed:
1. Heat exchanger in left hand exhaust duct.
2. Fresh air inlet and ducting to heat exchanger, ducting from
heat exchanger to heater valve and ducting from valve to
overboard exit.
SECTION 2
LIMITATIONS
There are no changes to the limitations when the heater kit is installed.
SECTION 3
EMERGENCY PROCEDURES
There are no changes to the emergency procedures when the heater kit
is installed.
UNCONTROLLED
COPY