Cessna 162 SKYLANE, Руководство по эксплуатации для пилотов и дополнение к учебнику по летной подготовке

Страница: 87 / 242

CESSNA SECTION 4
MODEL 162 WEIGHT AND BALANCE/
GARMIN G300 EQUIPMENT LIST
U.S.
WEIGHT AND BALANCE
The following information will enable you to operate your Cessna within
the prescribed weight and center of gravity limitations. To determine
weight and balance, use the Sample Loading Problem (Figure 4-4),
Loading Graph (Figure 4-5), and Center of Gravity Moment Envelope
(Figure 4-8) as follows:
Enter the appropriate basic empty weight and moment/1000 from the
weight and balance records for your airplane in the YOUR AIRPLANE
column of the Sample Loading Problem.
NOTE
In addition to the basic empty weight and moment noted on
these records, the C.G. arm (FS) is also shown, but need
not be used on the Sample Loading Problem. The moment
which is shown must be divided by 1000 and this value
used as the moment/1000 on the loading problem.
Use the Loading Graph to determine the moment/1000 for each
additional item to be carried; then list these on the loading problem.
NOTE
Loading Graph information for the pilot, passenger and
baggage is based on baggage loaded in the center of the
baggage areas as shown on the Loading Arrangements
diagram. For loadings which may differ from these, the
Sample Loading Problem lists fuselage stations (FS) for
these items to indicate their forward and aft C.G. range
limitations (baggage area limitation). Refer to Figures 4-6
and 4-7 for additional loading information. Additional
moment calculations, based on the actual weight and C.G.
arm (FS) of the item being loaded, must be made if the
position of the load is different from that shown on the
Loading Graph.
Total the weights and moments/1000 and plot these values on the
Center of Gravity Moment Envelope to determine whether the point
falls within the envelope, and if the loading is acceptable.
(Continued Next Page)
162PHUS-01 4-15