Cessna 162 SKYLANE, Руководство по эксплуатации для пилотов и дополнение к учебнику по летной подготовке

Страница: 76 / 242

SECTION 4 CESSNA
WEIGHT AND BALANCE/ MODEL 162
EQUIPMENT LIST GARMIN G300
U.S.
COMPREHENSIVE EQUIPMENT LIST
Figure 4-1 is a comprehensive list of all Cessna equipment which is available for
the Model 162 airplane equipped with Garmin G300 Integrated Cockpit System
(Serials 16200001 and On). This comprehensive equipment list provides the
following information in column form:
In the ITEM NO column, each item is assigned a coded number. The first two
digits of the code represent the identification of the item within Air Transport
Association Specification 100 (11 for Paint and Placards; 24 for Electrical
Power; 77 for Engine Indicating, etc.). These assignments also correspond to
the Maintenance Manual chapter for the airplane. After the first two digits, items
receive a unique sequence number (01, 02, 03, etc.). After the sequence
number, a suffix letter is assigned to identify equipment as a required item, a
standard item or an optional item.
Suffix letters are as follows:
In the EQUIPMENT LIST DESCRIPTION column, each item is assigned a
descriptive name to help identify its function.
In the REF DRAWING column, a Cessna drawing number is provided which
corresponds to the item.
NOTE
If additional equipment is to be installed, it must be done in
accordance with the reference drawing, service bulletin or a separate
ASTM approval.
In the WT LBS and ARM INS columns, information is provided on the weight (in
pounds) and arm (in inches) of the equipment item.
NOTE
•
Unless otherwise indicated, true values (not net change values)
for the weight and arm are shown. Positive arms are distances aft
of the airplane datum; negative arms are distances forward of the
datum.
•
Asterisks (*) in the weight and arm column indicate complete
assembly installations. Some major components of the assembly
are listed on the lines immediately following. The sum of these
major components does not necessarily equal the complete
assembly installation.
R = Required items or equipment for ASTM certification.
S = Standard equipment items.
O = Optional equipment items replacing required or standard items.
A = Optional equipment items which are in addition to required or
standard items.
162PHUS-00
4-4