User Manual
2019
Cervis, Inc.
19
Press the
Select/Next
switch (
S07
)
DOWN
.
Then, press the green
Horn/Start
pushbutton (
S09
).
MCB LEDs begin cycling from bottom to top, indicating that the MCB is in
Maintenance Mode
.
6. Tilt the MCB 60° or more.
7. After three seconds, the LEDs will flash in one of the following patterns:
a.
RF
→
BAT
→
A
→
B
–
sequence repeats
(
Tilt Fault Mode
enabled)
