User Manual
2019
Cervis, Inc.
13
MCB LEDs begin cycling from bottom to top, indicating that the MCB is in
Maintenance
Mode
.
Note: If you take too long to perform the next step, restart the process from Step 1.
5. Press and hold the
Select/Next
switch (
S07
)
UP:
Then press/hold the green
Horn/Start
pushbutton (
S09
) for approximately 5
seconds.
Release both switches when LED
A Select
starts blinking.
6. The
RF
and
B Selection
LEDs light steadily, indicating that the MCB is
attempting to locate all available Warrior receivers that the transmitter can link to.
